Suitable for mortars made on all colours of sand, including white sand.

Enhances the workability for Brick & Block Laying, Render and Mortar

1 Litre makes 20L of diluted plasticiser, sufficient to lay up to 250 000 standard bricks.

• Clear amber-coloured liquid is easier to measure, mix and dilute than powder-based plasticisers
• Air-entraining properties increase smoothness, strength, adhesion and workability of mortar, render and other sand/cement mixes
• Improves flexibility and durability, and reduces the cracking and weakening effects of thermal expansion/contraction and frost
• Can be used in both sand/cement and sand/lime/cement mixes

Directions

• Shake bottle before use.
• Dilute 1 litre of Brickiesu2019 Own with 19 litres of clean water in a clean container (at least 20L capacity) and mix well.
• Mix 12-25ml of the diluted Brickiesu2019 Own mix to 20kg cement in a typical M3 mortar.
• Diluted Brickiesu2019 Own Plasticiser can be used for up to 12 months, provided the solution remains clear and is stored in a cool location away from direct sunlight.

Manufactured to conform with AS 1478.

• When working with cement products, always avoid contact with skin and wear gloves, mask and safety googles.
• Store in HDPE plastic, air-tight container and check regularly for spills.
• **Do not store in metal container.**
• Non-flammable, but combustion may release toxic fumes.
• Do not mix Cement Australia Brickiesu2019 Own with other chemicals or additives.
• Check your local government by-laws for appropriate disposal of pack and discarded product.
• Do not wash into drains or waterways.