a finely milled, air separated clay used as a plasticiser in mortar and render applications where sands are low in clay content.

Clay is used for jointing *refractory brickwork, pottery clay mixes, modelling and rendering.

• refractory(a substance that is resistant to heat.)

Other names it is known by include:

• • Bricklayers Clay (Fire Clay)
  • Renderers Clay
  • One Clay

FEATURES & BENEFITS

typically used as a plasticiser, (to promote plasticity and flexibility and to reduce brittleness), that is added to renders or mortars which are used for brick and block laying

Used as a general purpose filler

Used as an ingredient in refractory reformulations. Clay provides refractory properties

A plasticiser for render, brick and block laying

Improves workability for renders and mortars based on sands that are deficient in clay content

Directions

• 1.Use as little Clay as possible to produce the required workability of the mortar or render.
• 2.Add the required amount of Clay to the mortar or render mix.

LIMITATIONS

• Clay should not be considered to be a substitute for Hydrated Lime
• Mortars and renders containing excessive Clay may reduce bond, flexural and compressive strengths while contributing to higher shrinkage in the finished product

SPECIFICATION

Cement Australia does not specify any mix designs incorporating Clay as the mix performance is dependent on the sands used, and sands can vary considerably.

RELEVANT AUSTRALIAN STANDARD

Mortars complying to AS 3700 should be tested as described in the Standard if Clay is added to these mixes.

This helps to ensure that the mix design conforms to the Standard with respect to performance and durability requirements.